LaserTooling.cs Test Steps

[FixtureInitialize] - Configures laser cutting machines (IDs: 97, 130167)

[FixtureCleanUp] - Cleans up temporary .txt files and uninstalls machines

C150616 - Changing the tooling direction of the part (normal → reversed profile)

C122143 - Changing the cutting condition (Small, Medium, Large, Mark, Vaporize, Dot mark)

C122144 - Changing the pierce condition (Normal, Gentle, Mark, None)

C122145 - Changing the approach parameters (dimple approach, approach length/radius/angle variations)

C122162 - Changing the withdrawal/escape parameters (escape length, radius, angle)

C150731 - Adding microjoint to remove scrap tooling

C123179 - Adding and deleting scrap tooling

C150730 - Adding and managing microjoints (0 to 5 microjoints)

C122142 - Opening and closing laser cut edit dialog

C168079 - Cut/Mark open polyline backwards (forward vs. backward direction)

C200388 - Process for open polylines (None, Mark, Cut, Based on layer)

C200390 - Allow approach that is more than 0.5 distance to opposite side

C200394 - Corner processing with cool settings where rounding/looping not possible

C200395 - Scrap cutting with approach length for separating cut

C200398 - Scrap cutting with scrap grid width settings

C145702 - Auto-recognize countersink curves and assign forming footprint layer

C122167 - Creating and deleting microjoints (with NC code generation)

C145687 - Skip point entities setting (None, Points on polylines, All)

C145682 - Laser cut glob “To point operation” conversion (path ↔ point)

C145706 - Display “mark forming footprint” setting in Laser CAM cutting section

C145732 - Pie strategy for cutting circular slugs

C145734 - Delete pie cut when scrap tooling is created

C3526 - Recompute tooling after enabling dimple on pie strategy sample

C202419 - Adding corner treatment processes (Looping, Dwell, Rounding, Stop, Cool, Slowdown, Do Nothing)

C214095 - Mark bend lines (with 3 processes: None, Partial, Full; valid & invalid bend data)