BendTooling.cs Test Inventory

BendTooling Fixture (50 tests)

Primary fixture for broad bend tooling regression coverage.

Setup and Basic Operations

[Test 196] Flux should allow bend setups to be added from bnc and bsetup files: Opens file dialog from "B Setup from File" menu, validates two file type filters (Bend Setup Files, BNC Code).
[Test 254] Punch should NOT be flipped when tooling is generated for machines with 'don’t auto flip tool' enabled: Uses script to verify flipped state on mounts for machine 2020087, expects False.
[Test 255] 'No angle measurement' option should be disabled when all ACB methods are disabled: Disables all ACB methods, checks mNoACB control is disabled in UI.

Machine-Specific Behavior

[Test 29] Test tooling for all machines (SKIPPED): Iterates all available machines, performs bend tech, reports pass/fail per machine.
[Test 30] Test auto tooling results for various parts with FX Bend machine (SKIPPED): Runs AutoCompute on multiple sanity parts, validates output consistency against references.
[Test 31] Sanity test for hybrid machine 220057 (SKIPPED): Tests 8m.geo part with hybrid machine, verifies curl, report, and DLD file consistency.
[Test 32] Test all machines with all display settings enabled (SKIPPED): Configures display settings, iterates machines, opens FX files, checks for crashes.
[Test 111] Flux should NOT crash on bend tech when Trumpf catalog is not installed: Uninstalls Trumpf catalog, runs PerformBendTech on machine 1520004, verifies no crash.
[Test 121100 context] "121100" machine tests: Multiple tests use Trumabend V-series (121100) for NC generation and report naming.

Crash Prevention (Critical Stability Tests)

[Test 33] Flux should NOT crash when ungrouped bends are grouped again: Ungroups a bend op, then regroups it; asserts no crash.
[Test 36] Flux should NOT crash when ev die is removed from a hem station: Replaces tool to RB300, removes mount from hem station; asserts no crash.
[Test 37] Flux should NOT crash when there are no Z tools in the inventory and tooling is performed for a part with Z bend: Strips all OWZ/EVZ tools from inventory, runs PerformBendTech on zbend.dxf; asserts no crash.
[Test 38] Machine Decal should be displayed correctly: Renders 3D scene with ShowBMachineFrame:True setting, compares rendered image to reference.
[Test 41] Flux should NOT crash when prebend is added: Drags operations to create prebend, toggles prebend checkbox; asserts no crash.
[Test 67] Flux should NOT crash when two hem bends are grouped: Selects two hem bends, clicks Group button; asserts no crash.
[Test 91] Flux should NOT crash when flipped is enabled in deposit glob: Modifies deposit combo in glob, verifies no crash.
[Test 98] Flux should NOT crash when bend tech is created with tandem machine: Creates bend tech with machine 220444 (tandem); asserts no crash.

Tool Replacement and Inventory Behavior

[Test 48] Other catalogs - Die height should be adjusted after die adapter is replaced: Replaces die tools in specific sequence, validates height adjustment in visual scene.
[Test 101] Flux should allow fold bar to be added to appropriate dies (non hem bend): Opens die mount, adds fold bar; verifies new fold bar entry created.
[Test 283] R30 insert should be disabled in replace tool panel when radius holder is OW308/K and radius insert is R50: Validates replacement tool constraints based on current holder/insert pair.
[Test 284] R12.5 insert should be disabled in replace tool panel when radius holder is OW308/S: Similar constraint validation for R12.5 insert.
[Test 285] Radius bends can be converted to 'bump' bending and vice versa: Toggles bump-bend checkbox; validates tool mount string changes and unfold size consistency.
[Test 286] Radius bends which cannot be done in a single step should be converted to bump bends automatically: Loads part with radius bend, verifies automatic conversion to multi-step bump bend.

Output Generation and File Comparison

[Test 49] Attach pdf report to NC - automatic NC generation: Configures BendRepAttachToNC:True, opens part, validates PDF in generated jupidu zip.
[Test 50] Attach pdf report to NC - forced NC generation: Similar, but uses forced NC generation (Type 'c') instead of automatic.
[Test 51] Attach pdf report to NC - forced NC generation (Acceptance test): Validates workflow panel post-process flow with PDF attachment.
[Test 53] Trumabend - V series: NC and report naming: Tests multi-setup part with 120872 machine, validates generated file naming conventions.
[Test 54] Trumabend - V series: NC and report naming (variant with HTML): Similar to Test 53 but generates HTML reports.
[Test 145] Reports should be output for each setup in a multi setup bend tech: Validates separate PDF reports for each setup in multi-setup part.
[Test 155] Bend deduction value should be output in correct units in the bend report: Validates deduction digits in HTML report (Normal: 0076, DIN: 0834, Custom: 0157).

Bend Deduction and Unit Conversion

[Test 119] Deduction should be displayed in working units in bend op tooltip: Compares tooltip text dumps for custom, DIN, and normal deduction curves.
[Test 125] Deduction should be displayed in working units in bend op tooltip (with MM units): Similar to 119 but explicitly switches to MM and validates tooltip.
[Test 127] Bend deduction value should be displayed in correct units in the bend tool tip: Validates numeric deduction values in glob (4, 21.1923, 1.934 for custom/din/normal in MM).
[Test 154] Bend deduction value should be displayed in correct units in the bend tool tip: Validates deduction in 3D model glob (0.1575, 0.8343, 0.0761 for custom/din/normal).

Sequence and Mode Behavior

[Test 115] Sequence icon should be highlighted when in bend sequence mode: Toggles sequence mode, validates icon pixel color change.
[Test 250] Change bend sequence manually in sequence mode: Clicks on bend segments in sequence mode, validates DeformingLength changes.

View and Visual Rendering

[Test 39] 3d model should NOT be disjoint when GAP strategy 3 is used (SKIPPED): Tests gap adaptation strategy with visual render comparison.
[Test 40] Tool segment name should be displayed next to the segment dropdown when navigating between segments: Clicks segments, validates Tool Segment and dropdown name are available.
[Test 42] Flux should display upper and lower sides of a part in different colors, in bend simulation: Renders top and bottom views, compares to reference images for color differentiation.
[Test 81] Flux should display upper and lower sides of a part in different colors, in bend simulation: Similar view color validation (appears twice with different machine options).

Geometry and Dimension Constraints

[Test 122] Geo: Flux should set bend lines marked 'Post_Process' as skipped: Validates processing dropdown correctly shows "Post-bent" for marked bend lines.
[Test 123] Geo: Flux should set bend lines marked 'Pre_Process' as pre bent: Validates processing dropdown correctly shows "Pre-bent" for marked bend lines.
[Test 287] Pre and post bends should have the same deduction value: Toggles pre-bending, validates Ops[0] and Ops[2] deductions are equal.

Mount and Station Positioning

[Test 99] Part should move with the tool station when it is moved: Drags mount position, validates scene render matches reference.
[Test 189] Flux should allow to increase mount length by dragging if there are no pieces in inventory and inventory check is disabled: Drags mount end point, validates length increases beyond 2000.
[Test 190] Flux should NOT allow to increase mount length by dragging if there are no pieces in inventory and inventory check is enabled: Enables inventory check, drags mount, validates length stays at 1200.
[Test 204] Mount positions should NOT be changed when a saved bsetup is loaded if the setup is not centered: Loads .bsetup file, validates mount position constraint is preserved.

Machine Configuration and Settings

[Test 205] Max. value for 'min. bend length to use angle measure' should be the same as bed length of the machine: Modifies machine TableLength, validates max spinner value in settings reflects new value.

Backgauge and Related Features

[Test 280] 'Backgauge' hyperlink should be displayed in bend globs: Opens bend glob, clicks "• Back-gauges" hyperlink, validates Gauges panel appears.
[Test 281] Segment name should NOT be empty in segment glob: Opens segment glob, validates selected combo item name is "12.7".
[Test 282] Actual length of the mount should be displayed in mount glob below the length field: Validates "Actual" label and length value (319.79998779296875) in glob.

Inventory Check Feature

[Test 57] Mark the segments not in inventory when 'inventory check' option is enabled: Enables inventory check, renders scene with marked tools, compares to reference image.

Hemming Fixture (8 tests)

Tests for hem-specific bend workflows and special tool rules.

Coining Behavior for Hems

[Test 95] Coining should NOT be displayed in bend glob for hem bends: Opens hem bend glob, verifies Coining field is absent.
[Test 96] Coining should NOT be displayed in bend glob for hem bends (via bendline dialog): Opens bendline dialog, sets processing to hem, then switches to bend tech; validates Coining hidden.

Hem Die and Flipping Rules

[Test 97] Hemming with FEV hem die: Configures machine with ACBLaser:1, renders hem bend, compares visual to reference.
[Test 112] Flux should allow tool change from EV-F to EV die in hem bends in I axis machines: Validates that EV-TEST die is available and enabled for replacement in I-axis machine.
[Test 113] Flux should NOT allow tool change from EV-F to EV die in hem bends in non I axis machines: Validates that EV-TEST die is unavailable or shows "Process mismatch" tooltip in non-I-axis.
[Test 114] Flux should display same sort options as bend tool inventory in replace tool dialog: Opens bend tools DB and replace dialog, validates sort dropdown options match (minus V.Width and Radius for dies).

Segment Parity Under Inventory Checks

[Test 210] The segments of the die and the hem bar should be the same when 'tool inventory check' is disabled: Tests with InfiniteBInventory:True, validates segment parity by dumping bend tech state.
[Test 211] The segments of the die and the hem bar should be the same when 'tool inventory check' is enabled: Tests with InfiniteBInventory:False, validates segment parity under inventory check.

BendSetup Fixture (7 tests)

Tests for setup-level configuration and station management.

ACB Segment and Flipping

[Test 121] Flux should flip the ACB sensor disk when flipping an ACB segment: Configures machine with ACB systems, opens segment glob, flips G25/WL segment; renders and compares scene.

Manual Tool Positioning

[Test 120] Flux should snap tools to the center of the ram when positioning them manually: Drags punch tool horizontally, validates it snaps to center; compares rendered scene.

Moving Stations and Creating New Setups

[Test 124] Moving stations to a new setup: Opens Tool Station menu, clicks "New Setup", validates setup combo shows "1" and navigator image matches reference.

Flip Tool Visibility Rules

[Test 126] Flip tool option should not displayed in punch glob for machines with 'dontautoflip' enabled: Tests multiple machines marked with don’t auto flip; validates Flip Tool option is absent.

Clamp Options by Machine Type

[Test 168] 'Clamp' option in mount glob and 'Clamp' glob should NOT be displayed for machines without clamps or with ONE style clamp: Machine 120315 has no/single clamp; validates Clamps option is absent.
[Test 169] 'Clamp' option in mount glob and 'Clamp' glob should be displayed for machines with tool clamps: Machine 120405 with ShowBClamps:True; validates Clamps option and glob appear.
[Test 170] 'Clamp' option in mount glob and 'Clamp' glob should NOT be displayed when tool clamps are invisible: Machine 120405 with ShowBClamps:False; validates Clamps option is absent despite machine having clamps.

GlobTests Fixture (18 tests)

Tests for UI dialog/glob behavior, tool filtering, and configuration constraints.

Tool List and Filter Behavior

[Test 16] Tools not in the selected 'Tool-list' should not be displayed in replace tool panel: Copies custom 408.btools, opens replace tool dialog, filters by list; validates only 3 tools shown.

New Setup and Station Options

[Test 128] New setup option should not be displayed in station glob when dv adapter is present in the station: Opens dvtest.fx, validates "New Setup" option is hidden.

Flip Tool Symmetry Rules

[Test 129] Flip tool option should NOT be displayed for symmetric tools: Opens part with symmetric tool, validates Flip Tool option is absent even in Advanced panel.

Segment Selection and Display

[Test 130] Selected segment length should be displayed next to segment dropdown in segment glob: Clicks segments in scene, validates dropdown selected item names (500, 10).
[Test 281] Segment name should NOT be empty in segment glob: (Duplicate from BendTooling; validates segment combo shows "12.7").
[Test 282] Actual length of the mount should be displayed in mount glob below the length field: (Duplicate from BendTooling; validates actual length 319.79998779296875).

Visual Styling Constraints

[Test 175] Expanded section of a glob should NOT be borderless: Opens punch glob with Advanced section, validates all left-edge pixels match expected border color.

Segment Flipping Across Mount Pairs

[Test 306] Flux should allow to flip individual segments of the insert and holder: Opens segment glob, clicks Flip Segment, validates IsFlipped state is TrueTrueFalseFalse for 4 pieces.

Multi-V Die Options

[Test 310] Other die option should be displayed in die glob for multi v dies: Loads custom Multi-V dies, replaces with one variant, validates "Other V" button absent; loads both variants and validates button present.
[Test 311] 'Other V' die option should be displayed when only one of the dies is in inventory and 'tool inventory check' is disabled: With infinite inventory, validates "Other V" option appears and changes I-axis position.
[Test 312] 'Other V' die option should not be displayed when machine has no I axis (SKIPPED): Configures machine with IAxis=0, validates "Other V" option is absent.

Double V Adapter Shift Behavior

[Test 313] 'DV shift' option should be displayed when double V adapter is mounted with only one die: Opens replace dialog, selects DV adapter, validates "DV Shift" button appears and changes I-axis position.
[Test 314] 'DV shift' option should be displayed when double V adapter is mounted with two dies: (Test name suggests two dies but test validates it is NOT displayed; logic may be inverted or test misnamed).
[Test 315] 'DV shift' option should be displayed when double V adapter is mounted with two dies (variant): Similar constraint test with another file variant.
[Test 316] Station with DV adapter - Flux should perform DV shift when a bend op is switched from station 1 to 2: Changes bend op station from 0 to 1, validates I-axis position changes.

Multi-Setup and DV Setup Interaction

[Test 2062] Bend radius/deduction should be changed when switching between stations in a DV setup: Creates new mount in second setup with DV adapter, validates tooltip warns "Bend radii and/or deductions were changed for some bends".
[Test 2063] Flux should NOT use BOX safety mode unnecessarily for hem bends: Runs bend tech on hem part, opens bend settings, validates "Box safety mode" is not shown.
[Test 2064] Flux should use BOX safety mode for hem bends when necessary: Runs bend tech on hem part requiring safety, validates "Box safety mode" is shown.

Machine Configuration

[Test 2067] Tool master check box should be displayed in the machine configuration dialog: Opens Machines DB, searches 120077, verifies Toolmaster checkbox visible during install.
[Test 2068] Machine should show up immediately in 'Installed' list when it is installed: Opens Machines DB, installs 120077, validates it appears in installed list immediately.

Summary Statistics

Total Tests: 83
Skipped: 6 (Tests 29, 30, 31, 32, 39, 312)
Active: 77

By Fixture

Fixture	Test Count
BendTooling	50
GlobTests	18
Hemming	8
BendSetup	7

By Category (Conceptual)

Category	Count
Crash prevention	9
Output/file validation	8
Tool/inventory behavior	11
UI/glob functionality	18
Unit/deduction display	6
Visual rendering	4
Setup/station management	7
Machine configuration	5
Hem-specific rules	8
Other	7